System Design for Uncertainty
Not rated yetRate this bookSystem Design for Uncertainty by Franz S. Hover and Michael S. Triantafyllou examines electromechanical systems operating with uncertain environments, parameters, and measurements. This guide follows the thirteen chapters of the LibreTexts adaptation, linking probability and simulation with physical models and feedback.
Free reading is available at the official source. Opens in a new tab.
FreeAbout this book
System Design for Uncertainty by Franz S. Hover and Michael S. Triantafyllou examines electromechanical systems operating with uncertain environments, parameters, and measurements. This guide follows the thirteen chapters of the LibreTexts adaptation, linking probability and simulation with physical models and feedback.
How to study this book
Choose one fictional dynamic system and maintain a table of nominal parameters, uncertain parameters, random inputs, and observations. Define the performance measure before comparing designs. Check deterministic behavior first, then add uncertainty in controlled stages so that changes in the result can be explained.
Chapter-wise explanations and study tasks
Chapter 1 — Introduction
The opening motivates robustness, performance, and cost in systems that operate outside idealized conditions. Define the uncertainty relevant to the task instead of treating uncertainty as a single vague margin.
Study task: Classify three uncertainties for a fictional system and identify the outcome each could affect.
Chapter 2 — Linear Systems
Linearity, time invariance, convolution, and transform tools support dynamic input–output analysis. The mathematical convenience depends on whether the model satisfies the required properties.
Study task: Verify a simple model’s linearity and compare its response with a direct time-domain calculation.
Chapter 3 — Probability
Events, conditional probability, random variables, and distributions provide a quantitative description of uncertainty. A chosen distribution is an assumption that should be justified or tested.
Study task: Calculate a conditional probability and explain why it differs from an unconditional rate.
Chapter 4 — Random Processes
Time-indexed randomness requires correlation and spectral information as well as one-time distributions. Time averages and ensemble averages are distinct concepts.
Study task: Compare several simulated realizations and explain which process property one record cannot establish alone.
Chapter 5 — Short-Term Statistics
Crossings, maxima, and distributional assumptions support the study of unusually large responses. Extrapolation toward rare events needs explicit assumptions and caution about limited observations.
Study task: Estimate a threshold-exceedance quantity and test its sensitivity to an assumed distribution parameter.
Chapter 6 — Water Waves
Linear-wave models turn environmental descriptions into kinematic or loading predictions. Their usefulness depends on the conditions under which simplifying assumptions hold.
Study task: Compare a model prediction with a stated wave scale and identify a limit of linear theory.
Chapter 7 — Optimization
Continuous, discrete, min–max, and dynamic-programming approaches address different decision structures. The selected objective and constraints determine the meaning of the solution.
Study task: Formulate a small design choice and explain which class of optimization fits it.
Chapter 8 — Stochastic Simulation
Monte Carlo and related simulation methods estimate behavior under sampled uncertainty. Repeated runs, sampling choices, and convergence checks matter more than one visually plausible trajectory.
Study task: Estimate a response probability at two sample sizes and report the variability of the estimate.
Chapter 9 — Moving-Frame Kinematics
Frame transformations connect body measurements with motion in another reference system. Orientation uncertainty can affect inferred position or velocity even when a sensor value itself is precise.
Study task: Transform a velocity and compare the result after a small orientation perturbation.
Chapter 10 — Vehicle Dynamics
Inertial models connect forces and moments with motion. Separate changes in physical parameters from changes in environmental forcing when interpreting uncertainty effects.
Study task: Simulate a small vehicle model for several mass values while keeping the input fixed.
Chapter 11 — Control Fundamentals
Feedback influences tracking and disturbance response while introducing measurement and implementation questions. The location of noise or disturbance in the loop changes its effect.
Study task: Draw separate process-disturbance and measurement-noise paths and compare their output influence.
Chapter 12 — Loopshaping
Frequency-domain design links performance with stability and uncertainty. Improving one frequency range can amplify problems elsewhere.
Study task: Compare two conceptual loop shapes and explain the robustness trade-off.
Chapter 13 — Math Facts
The reference chapter supports vector and matrix work used throughout the model. Check dimensions and conventions before treating a software result as an explanation.
Study task: Verify a matrix identity used in the running example and state its applicability.
Applied assignment
Prepare a reproducible uncertainty study for a simple dynamic model. Include a nominal solution, parameter variation, random input, measurement noise, two design alternatives, and a Monte Carlo convergence check. Explain which conclusion is analytical, empirical, or dependent on an untested assumption.
Suggested reading plan
Read Chapters 1–2 to define the system, 3–5 for uncertainty measures, and 6 for the motivating physical example. Use Chapters 7–8 for design comparisons and 9–12 for motion and feedback. Consult Chapter 13 throughout.
Questions for reflection
- Which uncertainty dominates the chosen performance measure?
- What additional data could reduce model uncertainty?
- Does improved nominal performance survive the uncertainty study?
Edition and source notes
This page uses the thirteen-chapter LibreTexts adaptation of Hover and Triantafyllou’s notes. Another catalog entry links the MIT course version of the same work; this guide follows the present export and uses its own model-verification exercises. It does not imply a distinct new substantive edition.
This page provides book information and study material. Full-text access is provided by the original publisher or authorised source; a listing does not grant permission to republish the book.
Read our Library Access & Copyright policyExplore the contents
Check the chapters covered in this edition.
Visit the official source
See reading, preview or purchase options.
Save for later
Keep this textbook in your saved collection.
Reader ratings & reviews
Share your thoughts
Your review helps other students choose the right resources.








