Computer modelling and simulationTextbook

Engineering Systems Dynamics, Modelling, Simulation, and Design

Not rated yetRate this book

Mehrzad Tabatabaian’s Engineering Systems Dynamics, Modelling, Simulation, and Design develops energy-based models through Lagrangian mechanics and bond graphs. This guide follows all eleven chapters, connecting mechanical, electrical, hydraulic, and coupled systems with simulation and frequency analysis.

FormatExternal access
LanguageEnglish
SubjectComputer modelling and simulation
LevelNot specified
No. of pages—
Published2021

Free reading is available at the official source. Opens in a new tab.

Engineering Systems Dynamics, Modelling, Simulation, and DesignFree

About this book

Mehrzad Tabatabaian’s Engineering Systems Dynamics, Modelling, Simulation, and Design develops energy-based models through Lagrangian mechanics and bond graphs. This guide follows all eleven chapters, connecting mechanical, electrical, hydraulic, and coupled systems with simulation and frequency analysis.

How to study this book

Define the system boundary, components, assumptions, effort and flow variables, and sign conventions before opening the simulator. Derive or inspect equations for a small case, check energy and dimensions, then compare predicted limiting behaviour with the numerical output. Reproduce the source’s examples before modifying them; 20-sim interface details may differ by version.

Chapter-wise explanations and study tasks

1. Introduction

Modelling, simulation, and design form related but distinct activities. A model represents selected behaviour for a purpose, while simulation explores the implications of that representation. Agreement with one output is not sufficient validation for every operating condition.

Study task: Write a model-purpose statement specifying an input, output, intended operating range, omitted effects, and a proposed validation check.

2. Lagrangian Mechanics

Kinetic and potential energy, generalized coordinates and forces, dissipation, and constraints provide a systematic route to equations of motion. The worked examples extend beyond a single mass-spring system into coupled and multidomain arrangements.

Study task: Derive a simple mass-spring-damper equation using an energy method and compare it with a force-balance derivation.

3. Bond Graph Modelling Method

Bond graphs organize power exchange through generalized effort and flow, basic elements, junctions, and causality. Power direction and computational causality convey different information and should not be confused.

Study task: Classify a small system’s storage, dissipation, and source elements and explain the effort–flow product in its physical domain.

4. Building Bond Graph Models

The general procedure turns a physical description into an energy network with assigned causalities and state variables. A systematic construction helps expose missing connections and inconsistent assumptions before simulation.

Study task: Construct a one-degree-of-freedom bond graph, label its junction constraints, and identify the resulting state variables.

5. Introduction to 20-sim

The software chapter connects model construction, parameter entry, simulation, and result inspection through examples. A successful run demonstrates numerical execution, while validation still requires physical and mathematical checks.

Study task: Reproduce a simple source model and record parameters, initial conditions, solver settings, expected behaviour, and one comparison with an analytical result.

6. Complex Mechanical Systems

Rotational components, gears, rack-and-pinion arrangements, levers, and planar rigid-body motion extend the bond-graph framework. Transformations must preserve the intended power relationships and geometry.

Study task: Compare a translational and a rotational model, then explain the transformation relation needed to connect them through a gear or lever.

7. Electrical Systems

Electrical bond graphs use voltage and current with consistent reference directions. Series, parallel, loop, bridge, and transformer examples connect graph structure with familiar circuit constraints.

Study task: Build a hypothetical RLC model and check that its junction equations agree with the corresponding current and voltage laws.

8. Hydraulic Systems

Pressure and volumetric flow serve as power variables, while fluid storage, inertia, and resistance depend on physical geometry and constitutive assumptions. Reservoir, valve, pump, and lift examples show how these elements combine.

Study task: Develop a conceptual reservoir-valve model and predict how changing a resistance or storage parameter affects the transient response.

9. Multi-Domain Systems

Coupled systems connect energy domains through suitable transducers and transformations. Brake, hoist, shaft-load, and pendulum examples require consistent coupling rather than separate subsystem models with incompatible interface assumptions.

Study task: Create an energy-flow diagram for a hypothetical electromechanical hoist and identify storage, losses, coupling relations, and an energy-balance check.

10. Frequency Analysis

Transfer functions and Bode plots describe input–output behaviour in the frequency domain. Gain, phase, cutoff behaviour, and model assumptions complement time-response analysis rather than replace it.

Study task: Compare the predicted step response and Bode behaviour of one simple linear model, explaining how both reflect the same parameters.

11. Miscellaneous Topics

Supporting topics include power-conjugate variables, gravity, equation extraction, derivative causality, algebraic loops, and thermal pseudo bond graphs. A pseudo bond graph needs particular care because its variable product does not automatically carry the ordinary power interpretation.

Study task: Inspect a model with an algebraic constraint or derivative causality and explain the mathematical issue it creates before choosing a numerical remedy.

Applied assignment

Develop a small coupled-system study containing a physical sketch, Lagrangian check for a simple subsystem, bond graph, parameter table, simulated transient, and frequency-response analysis where applicable. Include limiting-case tests, an energy check, and a discussion of modelling and numerical uncertainty.

Suggested reading plan

Read chapters 1–2 for foundations, 3–4 for bond-graph construction, and 5 for software practice. Study 6–8 comparatively across domains, integrate them in 9, and use 10–11 to deepen analysis and diagnose modelling complications.

Questions for reflection

  • What is a physical connection and what is a computational choice?
  • Which stored quantities become state variables?
  • Could a smooth simulation plot still describe an incorrect model?

Edition and source notes

Based on the eleven-chapter BCIT source with a preface dated October 2021. The guide follows the published chapter organization and treats videos, software screens, and supplementary media as companion resources. It does not assume that every later 20-sim version uses identical menus or solver defaults.

Consult the official source and full text.

About access & copyright

This page provides book information and study material. Full-text access is provided by the original publisher or authorised source; a listing does not grant permission to republish the book.

Read our Library Access & Copyright policy

Explore the contents

Check the chapters covered in this edition.

Visit the official source

See reading, preview or purchase options.

Save for later

Keep this textbook in your saved collection.

Reader ratings & reviews

Be the first to rate

No ratings yet

0%0%
0%0%
0%0%
0%0%
0%0%

Share your thoughts

Your review helps other students choose the right resources.

Rate this book

How helpful was this book?No sign-up needed. Your rating appears instantly.