Aerospace EngineeringTextbook

Aerodynamics and Aircraft Performance

Not rated yetRate this book

James F. Marchman’s Aerodynamics and Aircraft Performance connects basic aerodynamic and propulsion models with level flight, climbing, gliding, range, takeoff, landing, turns, and design constraints. This guide follows the nine teaching chapters and airfoil-data appendix in the LibreTexts third-edition source.

FormatExternal access
LanguageEnglish
SubjectAerospace Engineering
LevelNot specified
No. of pages—
PublishedNot specified

Free reading is available at the official source. Opens in a new tab.

Aerodynamics and Aircraft PerformanceFree

About this book

James F. Marchman’s Aerodynamics and Aircraft Performance connects basic aerodynamic and propulsion models with level flight, climbing, gliding, range, takeoff, landing, turns, and design constraints. This guide follows the nine teaching chapters and airfoil-data appendix in the LibreTexts third-edition source.

How to study this book

Use a fictional aircraft and state atmosphere, mass or weight, geometry, drag model, propulsion assumptions, and units. Distinguish thrust from power and available performance from required performance. Check that a calculation stays within the model’s aerodynamic assumptions. These are academic analyses, not instructions for operating an aircraft.

Chapter-wise explanations and study tasks

Chapter 1 — Aerodynamics

Atmospheric conditions, aerodynamic relationships, and performance-relevant quantities provide the foundation. Identify the assumptions behind an incompressible or other simplified treatment.

Study task: Create a consistent parameter sheet for a fictional aircraft and identify the assumed flow regime.

Chapter 2 — Propulsion

Jet and propeller descriptions connect thrust and power with speed and altitude. A constant-thrust assumption and a constant-power assumption do not produce identical performance predictions.

Study task: Compare two idealized propulsion models at the same speed and explain how their available-performance curves differ.

Chapter 3 — Additional Tools

The additional aerodynamic discussion extends the tools and clarifies the limits of flow assumptions. Recognize when a simplified relation is being used outside the setting that justifies it.

Study task: List the assumptions behind a chosen aerodynamic approximation and give a condition that would challenge one.

Chapter 4 — Straight and Level Flight

Required and available thrust or power determine level-flight possibilities in the selected model. A feasible operating point must satisfy the relevant force and power relationships.

Study task: Plot simple required and available curves and identify the modeled feasible region.

Chapter 5 — Climb and Glide

Altitude change introduces energy and force relationships beyond level flight. Climb and glide depend on different uses of available energy and should be analyzed with consistent assumptions.

Study task: Compare a hypothetical climb criterion with a glide criterion and identify the model quantities each requires.

Chapter 6 — Range and Endurance

Range and endurance are different objectives and need not favor the same condition. The result depends on propulsion, fuel-use assumptions, and the performance model.

Study task: Compare the conditions favored by maximum modeled time aloft and maximum modeled distance.

Chapter 7 — Takeoff and Landing

Accelerated ground and transition behavior requires assumptions about forces, changing speed, and the phases included. A simplified distance estimate is not an operational limit.

Study task: Build a conceptual phase-by-phase calculation outline and identify its major omitted real-world factors.

Chapter 8 — Turns

Turning performance connects acceleration, load factor, aerodynamic requirements, and available performance. Keep a geometric turn relation separate from whether the aircraft model can sustain it.

Study task: Compare a kinematically defined turn with a performance-feasible turn under a stated fictional model.

Chapter 9 — Constraint Analysis

Design constraints combine performance requirements and reveal competing demands on a configuration. Meeting one requirement does not establish a satisfactory overall design.

Study task: Draw a hypothetical constraint comparison and explain a trade-off between two requirements.

Chapter 10 — Airfoil Data Appendix

Airfoil data support aerodynamic estimates only when conditions and definitions match the model. Geometry, Reynolds-number context, and the measured quantity should remain visible.

Study task: Select an appropriate data curve for a hypothetical calculation and state why another curve would not be interchangeable.

Applied assignment

Prepare a fictional aircraft-performance notebook with parameter definitions, level-flight curves, one climb or glide comparison, a range-versus-endurance discussion, and a constraint diagram. Include units, assumptions, and sensitivity to one parameter. State why the results cannot substitute for approved aircraft performance information.

Suggested reading plan

Read Chapters 1–3 for models, 4–6 for unaccelerated performance, 7–8 for accelerated cases, and 9 for integrating requirements. Use the appendix only after matching its data conditions to the calculation.

Questions for reflection

  • Is the selected operating point physically feasible within the model?
  • Which assumption about propulsion most affects the result?
  • Are two performance objectives being confused?

Edition and source notes

The source page identifies the third edition, while its acknowledgments preserve Marchman’s earlier manuscript context and later editorial work. Chapter 5 is labeled Climb and Guide in the export; its developed discussion concerns climb and glide. This guide uses the intended term and follows nine substantive chapters plus the data appendix.

Consult the official source and full text.

About access & copyright

This page provides book information and study material. Full-text access is provided by the original publisher or authorised source; a listing does not grant permission to republish the book.

Read our Library Access & Copyright policy

Explore the contents

Check the chapters covered in this edition.

Visit the official source

See reading, preview or purchase options.

Save for later

Keep this textbook in your saved collection.

Reader ratings & reviews

Be the first to rate

No ratings yet

0%0%
0%0%
0%0%
0%0%
0%0%

Share your thoughts

Your review helps other students choose the right resources.

Rate this book

How helpful was this book?No sign-up needed. Your rating appears instantly.