Physical and Theoretical Chemistry Textbook MapsPhysical Chemistry for the Biosciences
Not rated yetRate this bookExplore physical-chemistry concepts in a bioscience-oriented LibreTexts collection spanning 16 main chapters. The guide connects available source discussions with original study tasks on energy, reactions, bonding and molecular behavior. Two chapters have source-text gaps, which are identified explicitly in their entries.
Read on the publisher’s website. Opens in a new tab.
FreeAbout this book
Physical Chemistry for the Biosciences is a LibreTexts collection organized around physical and chemical concepts relevant to biological systems. Its 16 main chapters range from units and gas behavior through thermodynamics, solutions, reaction kinetics, atomic models and molecular interactions to spectroscopy, photobiology and macromolecules.
The available substantive sections connect measurements with models at several scales. Examples include gas pressure, heat capacity, mixing, catalytic pathways and interactions with radiation. However, the checked source also contains empty entries. In particular, chapters 6 and 8 provide headings without explanatory text, so this page does not present invented detailed summaries for them.
The guide uses verified contents and explicitly identified source sections. Original tasks support conceptual comparison and assumption checking; they remain separate from the authorship of the source. Readers should consult the official rendered pages for complete available notation and visual material.
AI-assisted book summary
Reading guide
Use the verified contents as a map, but check whether a listed subsection contains usable text before treating it as an explanation. Record a source gap separately from a concept you have not yet understood.
For available material, connect a macroscopic observation with the molecular model used to explain it. Keep thermodynamic, kinetic and spectroscopic questions separate, and state which model assumptions make an interpretation possible.
Chapter overviews and study tasks
The entries describe selected source material identified in the coverage note. Tasks and reflection questions are original Academic Master editorial guidance, separate from the source’s exercises. Any unavailable detailed summary is identified explicitly.
1: Introduction to Physical Chemistry
The substantive reviewed unit section establishes conventions for expressing physical quantities and their magnitudes. It connects scientific communication with a consistent system of symbols. Several introductory entries in this source are empty, so the guide emphasizes the available unit discussion and verified contents rather than assuming that every listed subsection contains a full explanation.
Study task Check a hypothetical physical-chemistry equation for dimensional consistency.
2: Properties of Gases
The reviewed ideal-gas section derives macroscopic behavior from an assumed particle model and elastic wall collisions. It connects force and pressure with motion at the microscopic level. The chapter’s real-gas and distribution headings place that model within a wider comparison, making its simplifying assumptions essential to interpreting any prediction.
Study task List the ideal-gas assumptions and explain how one could fail in a real sample.
3: The First Law of Thermodynamics
The substantive heat-capacity discussion connects absorbed energy with microscopic motion. A monatomic gas supplies a simple comparison, while molecular complexity motivates additional ways to store energy. This gives the first-law topic a link between measurable thermal response and molecular structure, rather than treating heat capacity as only a tabulated constant.
Study task Compare two hypothetical heat capacities and identify a molecular explanation that needs testing.
4: The Second Law of Thermodynamics
The reviewed entropy section warns against relying on a vague description of disorder. It connects thermodynamic change with the distribution of energy and accessible possibilities, then relates that reasoning to the system and surroundings. The broader chapter develops free-energy and phase topics, but this overview is limited to the substantive entropy material consulted.
Study task Explain an entropy change without using disorder as the sole explanation.
5: Solutions
The mixing section relates composition to Gibbs energy, enthalpy and entropy. It introduces partial molar quantities as a way to describe how each component contributes to a mixture. The conceptual distinction is between a pure substance and a multicomponent system whose properties depend on composition as well as temperature, pressure and amount.
Study task Explain why composition must be specified when describing a mixture’s free energy.
6: Chemical Equilibrium
Coverage gap: the checked source provides headings for this chapter but no substantive explanatory text in sections 6.1–6.6. A detailed chapter summary cannot be verified from that material. The contents identify gaseous, solution and heterogeneous equilibria, ligand binding and bioenergetics; the following task is independent editorial practice based on those listed topics.
Study task Create a list of equilibrium questions to revisit when a complete source chapter is available.
7: Electrochemistry
The reviewed opening defines electrochemistry through electron-moving chemical processes and relates them to oxidation-state changes. Oxidation and reduction are linked parts of an overall transformation. The chapter’s wider topics connect that framework with potentials and biological systems, keeping the chemical event distinct from the electrical measurement used to describe it.
Study task Separate the oxidation and reduction roles in a simple conceptual cell.
8: Acids and Bases
Coverage gap: the checked source lists sections on acid–base definitions, dissociation, buffers, titration and biological examples, but sections 8.1–8.8 contain no substantive explanatory text. No detailed summary of those sections is presented here. The task below is an original study organizer drawn from the verified contents, not a claim about an unread explanation.
Study task Make a glossary of the listed acid–base topics and mark definitions needing an authoritative source.
9: Chemical Kinetics
The reaction-rate opening distinguishes change over an interval from change at a particular instant. It connects concentration–time measurements with quantitative rates and rate laws. The chapter’s later mechanism and temperature topics build outward from this foundation, making it useful to separate measured data, a fitted relationship and a proposed physical explanation.
Study task Compare an average slope with a tangent slope on a hypothetical concentration–time graph.
10: Enzyme Kinetics
Catalysis is introduced through an alternative reaction pathway with a lower activation barrier. The reviewed section connects rate constants with energetic descriptions before the chapter turns to enzyme models and inhibition. The key distinction is between changing the accessible route and changing the overall thermodynamic balance of reactants and products.
Study task Sketch catalyzed and uncatalyzed energy profiles with the same overall reaction-energy change.
11: Quantum Mechanics and Atomic Structure
The opening uses interactions with electromagnetic radiation as evidence about atomic structure. Its wave description supplies quantities used in later quantum models. This establishes a distinction between a measured spectral behavior and the mathematical representation used to explain it, while retaining the need to connect each model with the observations it addresses.
Study task Relate frequency and wavelength, then state what extra information a spectral interpretation needs.
12: The Chemical Bond
The Lewis-structure section introduces bonding as an electrical interaction and places simplified models within the history of chemical explanation. The broader chapter then compares several bonding descriptions. A useful study practice is to ask what each representation predicts, rather than assume that a dot diagram and an orbital description show the same information.
Study task Compare a Lewis representation and an orbital model by their intended explanatory roles.
13: Intermolecular Forces
The reviewed objectives connect material properties with interactions among particles. The opening distinguishes breaking an intramolecular bond from overcoming forces between molecules. This distinction helps explain why a phase change need not produce new chemical species and why properties such as volatility cannot be inferred solely from the strength of bonds within a molecule.
Study task Explain vaporization using intermolecular interactions without breaking every internal bond.
14: Spectroscopy
The vocabulary section introduces electromagnetic radiation through complementary wave and particle descriptions. Spectroscopy then links interactions with radiation to information about matter. The guide focuses on that conceptual foundation rather than presenting every later technique, encouraging readers to connect a measurement with the kind of transition or process being probed.
Study task Compare absorption and emission as distinct observations in a conceptual spectrum.
15: Photochemistry and Photobiology
The opening connects absorption with a match between photon energy and an accessible energy difference. It distinguishes electronic excitation from other forms of interaction with radiation. The chapter’s photosynthesis and vision headings extend this physical foundation to biological contexts, showing why energy selection matters before a photochemical outcome is considered.
Study task Explain why changing wavelength can change which molecular process is excited.
16: Macromolecules
The substantive polymer section introduces macromolecules through repeating units and chain architecture. Branching and cross-linking broaden the picture beyond a single unbranched chain. This supports comparison with biological macromolecules while keeping a repeating-unit representation separate from a claim that every molecule in a material has exactly the same length or arrangement.
Study task Draw two different polymer architectures and identify what the repeat-unit formula omits.
How to study this book
Create a topic notebook with a source-coverage column. Explain quantities in words before manipulating symbols, and compare each model with an observation it can address. Mark chapters 6 and 8 as awaiting substantive source material rather than treating their editorial organizers as summaries.
Reflection questions
- How does a molecular model help explain a measured thermal property?
- Why do thermodynamic favorability and rate answer different questions?
- What evidence would be needed to fill a source-text gap accurately?
Sources and coverage
Consulted 18 November 2026: the official source for Physical Chemistry for the Biosciences and its linked PDF. Verified contents; substantive selected text from 1.2, 2.3, 3.3, 4.2, 5.3, 7.1, 9.1–15.1 and 16.2. Chapters 6 and 8 contain no substantive explanations in the checked source sections; their detailed summaries remain unavailable. Some other listed entries are also empty. Equations, videos and all figures were not fully reviewed. Compilation dates have not been treated as edition publication dates. Consult the full rendered source for complete available explanations, notation and visual resources.
This page provides book information and study material. Full-text access is provided by the original publisher or authorised source; a listing does not grant permission to republish the book.
Read our Library Access & Copyright policyPhysical interpretation
Relate measurements to molecular descriptions.
Model scope
Distinguish energetic, kinetic and spectroscopic questions.
Source awareness
Identify unavailable explanations without inventing coverage.
Reader ratings & reviews
Share your thoughts
Your review helps other students choose the right resources.


