Electrical EngineeringTextbook

Electromagnetics II

Not rated yetRate this book

Steven W. Ellingson’s Electromagnetics II develops propagation in general media, conductor behavior, reflection, guided waves, radiation, and antennas. These instructions follow ten teaching chapters and the three reference chapters on materials, mathematical formulas, and physical constants.

FormatExternal access
LanguageEnglish
SubjectElectrical Engineering
LevelNot specified
No. of pages—
PublishedNot specified

Free reading is available at the official source. Opens in a new tab.

Electromagnetics IIFree

About this book

Steven W. Ellingson’s Electromagnetics II develops propagation in general media, conductor behavior, reflection, guided waves, radiation, and antennas. These instructions follow ten teaching chapters and the three reference chapters on materials, mathematical formulas, and physical constants.

How to study this book

Review vector fields, phasors, Maxwell’s equations, and basic transmission lines. State the time convention, medium parameters, propagation direction, polarization, and boundary conditions. Check whether a quantity is a field amplitude, power, impedance, or propagation constant before using it in a calculation.

Chapter-wise explanations and study tasks

Chapter 1 — Preliminary Concepts

The preliminary material establishes conventions and tools needed for the later field analysis. Small differences in notation can produce sign or phase mistakes even when the underlying physics is the same.

Study task: Create a notation sheet with phasor convention, units, and the meaning of each field quantity.

Chapter 2 — Magnetostatics Redux

The magnetostatic review strengthens the field concepts used later in radiation and current-related problems. Apply the governing relation with geometry and source assumptions explicit.

Study task: Analyze a simple steady-current geometry and verify the direction and dimensions of the resulting field.

Chapter 3 — General-Medium Propagation

Material response changes wave propagation and attenuation. Separate the real and imaginary behavior of the relevant propagation quantities under the chosen convention.

Study task: Compare propagation in an ideal lossless medium with a stated lossy-medium model.

Chapter 4 — Imperfect Conductors

AC current distribution, wire impedance, and surface impedance connect material conductivity with frequency-dependent behavior. The assumed current distribution should not be carried unchanged across all frequencies.

Study task: Explain how a high-frequency current model changes an impedance estimate for a conductor.

Chapter 5 — Reflection and Transmission

Normal and oblique incidence, slabs, TE and TM components, refraction, internal reflection, and evanescent behavior require consistent geometry and boundary matching.

Study task: Draw an oblique-incidence geometry, identify TE or TM polarization, and check a simple limiting case.

Chapter 6 — Waveguides

Modes, cutoff, phase velocity, and group velocity describe guided propagation. A mode’s field pattern and allowable frequency are linked to geometry and boundary conditions.

Study task: Compare two waveguide modes and explain why a selected frequency may support one but not the other.

Chapter 7 — Transmission Lines Redux

Parallel-wire, microstrip, and coaxial examples extend line analysis to practical losses and constraints. Distinguish a nominal characteristic impedance from attenuation and power-handling considerations.

Study task: Compare two hypothetical line choices using separate propagation-loss and impedance criteria.

Chapter 8 — Optical Fiber

Acceptance and dispersion connect ray or wave guidance with signal propagation. A fiber’s ability to guide light does not alone determine how well it preserves a short pulse.

Study task: Explain the difference between a guidance condition and a dispersion-related communication limitation.

Chapter 9 — Radiation

Current moments, vector potential, and dipole or distributed-current examples connect sources with radiated fields. Specify the observation region before applying a far-field approximation.

Study task: Relate a simple current distribution to its radiation pattern and identify the far-field assumption.

Chapter 10 — Antennas

Radiation efficiency, impedance, directivity, gain, reception, reciprocity, effective aperture, and link equations describe different aspects of antenna behavior. Keep gain distinct from efficiency and matching.

Study task: Build a hypothetical link calculation and identify where mismatch, radiation efficiency, and path assumptions enter.

Chapter 11 — Material Parameters

Reference parameters support calculations only when their conditions and units match the problem. A tabulated material value is not automatically independent of frequency or environment.

Study task: Document the parameter assumptions for a wave example and test sensitivity to one material value.

Chapter 12 — Mathematical Formulas

The formulas provide tools for manipulating fields and geometry. Verify the applicability of an identity rather than using it solely because its form resembles the expression.

Study task: Check one field derivation with a relevant mathematical identity and state the coordinates used.

Chapter 13 — Physical Constants

Constants establish a numerical basis for calculations. Distinguish exact or adopted constants from modeled material parameters and preserve unit consistency.

Study task: Audit a calculation’s constants and units and estimate whether its final magnitude is plausible.

Applied assignment

Prepare a hypothetical guided-to-radiated communication model. Include a medium description, one propagation calculation, one boundary or mode analysis, an antenna model, and a link estimate. State all conventions and perform a power or limiting-case check. Identify what a physical experiment would need to validate.

Suggested reading plan

Review Chapters 1–2, then study 3–5 for media and boundaries, 6–8 for guided propagation, and 9–10 for radiation and antennas. Use Chapters 11–13 as references during calculations rather than as separate theory units.

Questions for reflection

  • Which boundary condition determines the allowed field pattern?
  • Does the approximation concern geometry, material loss, or observation distance?
  • Which part of the link result depends most strongly on a model assumption?

Edition and source notes

This guide follows Ellingson’s LibreTexts Electromagnetics II, including ten substantive chapters and three reference entries. It is the second volume’s propagation and radiation material, not a duplicate of Electromagnetics I. The exercises are analytical studies rather than equipment-selection or installation instructions.

Consult the official source and full text.

About access & copyright

This page provides book information and study material. Full-text access is provided by the original publisher or authorised source; a listing does not grant permission to republish the book.

Read our Library Access & Copyright policy

Explore the contents

Check the chapters covered in this edition.

Visit the official source

See reading, preview or purchase options.

Save for later

Keep this textbook in your saved collection.

Reader ratings & reviews

Be the first to rate

No ratings yet

0%0%
0%0%
0%0%
0%0%
0%0%

Share your thoughts

Your review helps other students choose the right resources.

Rate this book

How helpful was this book?No sign-up needed. Your rating appears instantly.